Follow the guide below to learn how to download and install the latest Android 10 One UI 2.5 firmware on the Samsung Galaxy Note 10 and Note 10+. One UI 2.5 is the latest update of the One UI skin family. Samsung introduced the new version initially on the Samsung Galaxy Note 20. Eventually, the company released the update to the Galaxy S20 and Galaxy S10. Now the firmware is available on the Galaxy Note 10 and Note 10+.
Update: One UI 2.5 is now available on the Samsung Galaxy Note 10 Lite. The firmware version is N770FXXU5CTH4 with September 2020 security patch. The update is available in Spain. Download the firmware below.
The One UI 2.5 firmware is available for all Exynos powered variants of the Galaxy Note 10, specifically SM-N970F Galaxy Note 10 and SM-N975F Galaxy Note 10+. These variants are powered by the Exynos 9825 chipset. The update is rolling out in Germany with the following build number:
- Galaxy Note 10 – N970FXXU6DTH7
- Galaxy Note 10+ – N975FXXU6DTH7
There is no news whether the Snapdragon-powered variants will receive the update any time soon. We will update the article once the Snapdragon variants receive this update.
However, if you have the Exynos variant of the Galaxy Note 10 and Note 10+, then you can go ahead and update your phone to One UI 2.5. If you live in Germany, you can update through an over-the-air update from the settings menu. But if you are not eligible for the update, you can manually download and install the firmware on your phone. Check out below to learn how to.
Download and Install One UI 2.5 OTA Update on Galaxy Note 10 and Note 10+
Warning: As we mentioned above, the update is available only for the Exynos variants of the phone. Please do not try this tutorial if your phone has a Snapdragon chipset. Any attempt will result in you bricking your phone. Please proceed at your own risk.\
#1. Over-the-air update
The first thing you should try is to update through OTA (over the air). This is the easiest and quickest method of updating. If your phone is eligible for the update and you live in Germany, you can update to One UI 2.5 by following these simple steps:
- Go to Settings.
- Scroll down and tap on Software Update.
- Tap on Download and Install.
The phone will check for any available updates. If there’s any update available, the phone will download it and you will be able to install it. However, if the phone does not find any updates and it says that the software is up to date, the OTA update has yet to reach your phone. In this case, you need to manually download and flash the update, as explained below.
#2. Manual One UI 2.5 installation with Odin
This method is somewhat lengthy and complex. But if you follow the tutorial below step by step, you will update your phone in no time.
Firstly, you need to download some tools that are required for this process. There are two things that you need to download: Odin and Frija.
Download both of these files on your computer. Both files are stored as archives. Extract both of them and put them in a single folder.
- Go to Settings > About Phone > Software Information. Quickly tap 7 times on Build Number to enable Developer Options.
- Go to Settings > Developer Options and tap on USB Debugging. This will allow your phone to communicate with the computer to install the new firmware.
- Install the latest drivers for the Galaxy Note 10 (Download)
- Go to Settings > Developer Options and enable OEM unlocking.
- Make sure you have at least 60% of battery life left. If your phone gets stuck during the installation process, it will not turn off.
Download Note 10 One UI 2.5 Firmware
Go to the folder where you extracted Frija and double tap on “Frija.exe” to open the program. You need to enter your phone’s model number. In this case, it is as follows:
- Galaxy Note 10 – SM-N970F
- Galaxy Note 10+ – SM-N975F
- Galaxy Note 10 Lite – SM-N770F
The second field you need to fill is CSC. This is an important field because it is the code that finds the proper German firmware. In this case, you need to write DBT (PHE for Note 10 Lite). Once you have filled both fields, click the Download button. The firmware will be downloaded and stored on your computer.
Install Note 10 One UI 2.5 Firmware
Open the folder where the downloaded firmware is stored. The name of the firmware will be SM-N970F_1_20200829040203_s4bm040jwq_fac.zip for the Galaxy Note 10 and SM-N975F_10_20200727163233_94tyc3if2b_fac.zip for the Galaxy Note 10+. Extract the firmware archive. There will be five new files that start with AP, BL, CP, CSC, and HOME_CSC.
- Go to the folder where you extracted Odin and launch the program.
- You will see five fields: BL, AP, CP, CSC, and USERDATA. We will work with the first four fields. Do not worry about USERDATA.
- Click on AP and select the file that starts with AP. Do the same thing for BL, CP, and CSC.
- Press and hold the power button on your phone. Tap on Power off to turn it off.
- Enter recovery mode. To do so, press and hold the volume up + Bixby + Power keys at the same time.
- Using the volume keys, highlight Wipe data/factory reset and press the power button to confirm. This will wipe everything on your phone.
- Using the volume keys, select Reboot to bootloader and press the power button to confirm. The phone will boot into Download Mode.
- Now connect your phone to your computer. The ID:COM box on Odin will turn blue.
- Press the Start button.
Odin will now flash the Android 10 One UI 2.5 firmware on your Samsung Galaxy Note 10/Note 10+. The flashing process will take a few minutes because the firmware is massive, weighing over 5GB in size. The phone will automatically restart when the installation process is finished.
Now the phone will take around five minutes to boot up. You need to set it up and enter your information. To verify that everything is up to date, go to Settings > About Phone > Software Information. The number under One UI version will be 2.5. That is all you need to do. Your phone is now updated to the latest version.